A made-to-measure blind is only as good as the measurements it’s made from. The good news is that measuring a window properly takes about ten minutes, needs one tool, and is much easier than most people expect. This guide walks you through it, step by step, and covers the few things that catch people out.
What you’ll need
- A metal tape measure. Cloth and plastic tapes stretch, and a few millimetres matter on a blind.
- A pencil and paper, or your phone’s notes app.
- Someone to hold the other end, if the window is wide.
You can give us your measurements in centimetres, inches or millimetres. Pick whichever your tape shows most clearly and stick to it for the whole window.
Step 1: Decide where the blind will hang
There are two ways to fit a blind, and you need to choose before you measure.
- Inside the recess (recess fitting). The blind sits inside the “hole” the window is set into. It looks neat and tidy and leaves the windowsill free.
- Outside the recess (exact fitting). The blind is fixed to the wall above the window and overlaps it on all sides. This is useful when the recess is shallow, the window frame gets in the way, or you want to block more light around the edges.
Step 2: Measuring inside the recess
- Measure the width of the recess in three places: top, middle and bottom.
- Measure the drop (the height) in three places: left, middle and right.
- Write down the smallest width and the smallest drop. Walls are rarely perfectly square, and using the smallest figure means the blind will fit at its tightest point.
- Don’t make any deductions yourself. Give us the exact size of the recess. We make the blind to fit it.
Top tip for roller blinds: you can take the width at the top of the recess, where the blind will actually be fixed, for the best fit.
Tiles part-way up the recess? This is common in kitchens and bathrooms. Measure the width between the tiles, not the plaster above them, so the blind won’t catch on the way down.
Step 3: Measuring outside the recess
- Decide how far you want the blind to overlap the window opening.
- To cut down light around the edges, we recommend an overlap of at least 70 mm at the top and 50 mm on each side.
- The overlap at the bottom is up to you, but check for anything in the way, such as a radiator, a deep windowsill or a worktop.
- Measure the exact width and drop of the area you want the blind to cover. That is the size we’ll make.
Top tip for roller blinds: the overall width of a roller blind, including its brackets, is about 35 mm wider than the fabric. You can measure for the full bracket-to-bracket width, or for the width you’d like the fabric to cover. Just be clear which one you’ve measured.
Step 4: Replacing a blind you already have?
If your old blind fitted well and you want the same size, simply measure the old blind including its fittings, and order it as an exact (outside recess) fit. We’ll make you one the same size.
Step 5: Check your size against the blind you want
Each blind has a minimum and maximum size, shown on the product page when you enter your measurements. For example, our roller blinds can be made from 50 cm to 225 cm wide. If your window falls outside the range, give us a ring on 01924 283284 and we’ll talk it through.
The mistakes we see most often
- Measuring once. Always measure in three places. Old houses especially can be several millimetres out from top to bottom.
- Mixing units. Writing the width in centimetres and the drop in inches is easier to do than you’d think. Pick one unit before you start.
- Taking a bit off “to be safe”. For a recess fit, give us the exact recess size and let us make the allowance.
- Forgetting the handles. Window handles, stays and locks can stop a blind dropping inside the recess. Check the blind will clear them.
- Width and drop the wrong way round. Width is always side to side; drop is top to bottom.
Child safety. Blinds with cords or chains come with the child safety devices required by the EU safety standard for blinds.
Not sure? Ask before you order
Because every blind is made to the sizes you give us, we can’t take back a blind made to measurements that were supplied incorrectly (our returns and refunds page explains this). So if anything about your window looks awkward, please call us on 01924 283284 or email [email protected] before you order. We’re a small, family-run business in Ossett and we’re happy to help.
Ready to choose?
Once you have your measurements, choose your blind: roller blinds from £44, Roman blinds in 60 fabrics, or real wood and faux wood Venetian blinds. Enter your width and drop and you’ll see the full price for your size straight away. Every blind is made to order in our UK workshop, usually dispatched within 7 working days, with free UK delivery.
Not sure about the colour yet? Order up to eight free samples to hold up at your window first. You can also read the full measuring guide or our FAQs.
